ITSY EVO 2026 PNP Titanium Edition

$369.64
/
Shipping calculated at checkout.

DESIGNED AND BUILT IN CALIFORNIA

This is a pre-order.
Shipping starts EARLY September, so secure your build slot now.

Each ITSY Evo 2026 PNP is hand-built to order, individually tuned, and test flown before shipping. If in stock, please allow 3–5 business days from the order date for shipping.

Built for the 2026 DJI O4 Pro

The ITSY Evo 2026 has been completely redesigned around the 2026 DJI O4 Pro and its new ICM-40609D gyro.

The new frame uses our two-stage vibration isolation system, with CNC-machined aluminum camera mounts and custom-molded vibration dampers, to help deliver cleaner gyro data and smooth, glitch-free stabilization in Gyroflow.

The PNP also uses our new SPYDR CINE 1103 / 9000KV motors, developed specifically for the ITSY platform for greater power, efficiency and smoothness.
Every motor is individually vibration-tested by us and must pass QC before being installed in your aircraft.

Like everything we build, the ITSY is designed around high-performance professional use—just in an exceptionally small package.

Plug + Play

This is a Plug and Play aircraft. It DOES NOT include the DJI 04 Pro Air unit.
Install your selected DJI O4 Pro Air Unit, bind to your radio, and you're ready to fly.

DJI O4 Pro Air Unit is not included.

This build consists of:

  • 1x ITSY Evo 2026 Frame — Titanium Edition
    • Two-stage camera vibration isolation
    • CNC-machined aluminum camera mounts
    • Custom-molded vibration dampers
    • Titanium wafer-head Torx T5 hardware
    • TPU frame vibration damper
    • GPS, antenna and receiver mounts
    • Custom lightweight battery pad
    • Custom battery strap
  • 1x TuneRC Poly F405 2S–4S AIO
  • 4x SPYDR CINE custom 1103 / 9000KV motors — 3S
    • Individually vibration-tested and QC approved
  • 8x Gemfan 45mm tri-blade props
  • 1x ELRS 2.4GHz RX or Crossfire Nano RX
  • 2x Linear UFL micro antennas

For orders outside the U.S., please see our shipping policy here.

Receiver
DJI 04 air unit shown (but not included)
ITSY EVO 2026 PNP Titanium Edition
DJI 04 air unit shown (but not included)
ITSY EVO 2026 PNP Titanium Edition
ITSY EVO 2026 frame kit (Titanium Edition) PRE-ORDER

ITSY EVO 2026 frame kit (Titanium Edition) PRE-ORDER

$64.75
/
Shipping calculated at checkout.

Shipping starts 9/4
Built for the new 2026 DJI O4 Pro.

ITSY Evo 2026 was specifically engineered for the 2026 DJI O4 Pro and its new ICM-40609D gyro, helping deliver cleaner gyro data for smooth, glitch-free stabilization in Gyroflow.

That became the focus of the entire redesign.

Over months of development, hundreds of test flights and more than 40 design iterations, we worked to isolate the O4 Pro from the high-frequency vibration that can cause stabilization artifacts on ultra-small FPV platforms.

The result is an entirely new two-stage vibration isolation system using CNC-machined aluminum camera mounts and custom-molded vibration dampers.

At only 1.6", ITSY Evo stays true to our approach: build for high-performance professional use first, then make it as small, light and refined as possible.

Pair it with the new SPYDR motors

The new ITSY was developed alongside our latest motors, designed for ultra-efficient, high-performance micro builds.

They’re smoother, lighter and more powerful than anything else in their class. And because vibration matters, every motor is individually vibration-tested by us and must pass QC before it ships.

Details

  • 1.6" cinematic FPV frame

  • Specifically designed for the 2026 DJI O4 Pro

  • Optimized for the new ICM-40609D gyro

  • Engineered for clean, glitch-free Gyroflow stabilization

  • Two-stage vibration isolation system

  • CNC-machined aluminum camera mounts

  • Custom-molded vibration dampers

  • Titanium wafer-head screws — Torx T5

  • Includes TPU frame vibration damper

  • Includes GPS, antenna and receiver mounts

  • Custom lightweight battery pad

  • Custom battery strap

  • Developed through 40+ design iterations

  • Validated through hundreds of test flights

  • Engineered for high-performance professional use

    For orders outside the U.S., please see our shipping policy here.

ITSY EVO main frame

ITSY EVO main frame

$9.92
/
Shipping calculated at checkout.

Replacement main frame for the ITSY EVO.

ITSY EVO replacement carbon duct

ITSY EVO replacement carbon duct

$11.50
/
Shipping calculated at checkout.

Replacement carbon duct for the ITSY EVO. price reduced non-chamfer edges.

Shipping starts 9/4
Built for the new 2026 DJI O4 Pro.

ITSY Evo 2026 was specifically engineered for the 2026 DJI O4 Pro and its new ICM-40609D gyro, helping deliver cleaner gyro data for smooth, glitch-free stabilization in Gyroflow.

That became the focus of the entire redesign.

Over months of development, hundreds of test flights and more than 40 design iterations, we worked to isolate the O4 Pro from the high-frequency vibration that can cause stabilization artifacts on ultra-small FPV platforms.

The result is an entirely new two-stage vibration isolation system using CNC-machined aluminum camera mounts and custom-molded vibration dampers.

At only 1.6", ITSY Evo stays true to our approach: build for high-performance professional use first, then make it as small, light and refined as possible.

Pair it with the new SPYDR motors

The new ITSY was developed alongside our latest motors, designed for ultra-efficient, high-performance micro builds.

They’re smoother, lighter and more powerful than anything else in their class. And because vibration matters, every motor is individually vibration-tested by us and must pass QC before it ships.

Details

  • 1.6" cinematic FPV frame

  • Specifically designed for the 2026 DJI O4 Pro

  • Optimized for the new ICM-40609D gyro

  • Engineered for clean, glitch-free Gyroflow stabilization

  • Two-stage vibration isolation system

  • CNC-machined aluminum camera mounts

  • Custom-molded vibration dampers

  • Titanium wafer-head screws — Torx T5

  • Includes TPU frame vibration damper

  • Includes GPS, antenna and receiver mounts

  • Custom lightweight battery pad

  • Custom battery strap

  • Developed through 40+ design iterations

  • Validated through hundreds of test flights

  • Engineered for high-performance professional use

    For orders outside the U.S., please see our shipping policy here.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

FAQs

We use the Tune RC Poly F405. One of the cleanest and best performing FC we have tested.

The best balance of performance and flight time is using the Amax 1102/9000kv motors

YES! We did months of testing and tweaks. see the blog on this website for a complete build and tuning guide. click here

You may also like

Recently viewed